01
Switch-mode power-supply filters
Fully Automatic Winding Machine
Original machine image from the GRJGRXJ product catalog
Professional winding solutions
AJGC-0630SLD-GW
Fully Automatic Dual Winding Inductor Winding Machine
A dual-station automatic winding machine designed to produce two inductor processes on one system.
Wire Diameter
0.06–0.30 mm
Max. Final Coil O.D.
40 mm
Min. Final Coil I.D.
6 mm
1
Tell us your application
Fully Automatic Winding Machine
2
Technical Specifications
AJGC-0630SLD-GW
3
Request a Quote
Fully Automatic Dual Winding Inductor Winding Machine
Wide Applications
Discuss your core, wire, insulation and output target with our technical team before confirming a configuration.
02
Power and signal-line noise filters
Fully Automatic Winding Machine
03
Transformers and interference suppressors
Fully Automatic Winding Machine
Process Flow
A clear four-step overview of the intended production workflow.
Step 1
Load Two Cores
Step 2
Select Programs
Step 3
Dual Automatic Winding
Step 4
Finished Inductors
What determines the right machine configuration?
The model is only the starting point. These four inputs determine whether the winding head, storage ring, control method and tooling suit your actual coil.
01
Core geometry
Provide outside diameter, inside diameter, height and core shape.
02
Wire or tape
Confirm material type, diameter or tape width and insulation requirements.
03
Finished coil
Share the required final dimensions, turns and winding arrangement.
04
Production target
State output per shift, changeover frequency and automation expectations.
AJGC-0630SLD-GW
Technical Specifications
The parameters below are transcribed from the current GRJGRXJ English product catalog.
Original machine image from the GRJGRXJ product catalog
Technical SpecificationsAJGC-0630SLD-GW
- Supply Voltage
- AC 220V (50Hz)
- Wire Diameter
- 0.06–0.30 mm
- Max. Final Coil O.D.
- 40 mm
- Min. Final Coil I.D.
- 6 mm
- Max. Final Coil Height
- 18 mm
- Preset Specifications
- 99 sets
- Max. Winding Speed
- Max. 1500 rpm
- Wiring Control
- Servo-step precise linkage
- Operating Interface
- 7-inch HMI touch screen
- Mechanical Dimensions
- L 2720 × W 630 × H 1680 mm
- Weight
- About 270 kg
- Package Size
- 2 × export steel-band wooden crates: L 950 × W 900 × H 1500 mm
- Package Weight
- About 356 kg
GRJGRXJ · COMPLIANCE
Compliance & Certificates
Review the available conformity documents for GRJGRXJ winding and taping machine families.
2011/65/EU RoHS Directive
RoHS Attestation of Conformity — Winding Machine
European Certification Services (ECES)
- Document No.
- CE-4482-170925
- Issued
- 17 Sep 2025
- Valid until
- 17 Sep 2030
2006/42/EC Machinery Directive
Machinery Directive Attestation — Winding Machine
UDEM International Certification
- Document No.
- M.2025.206.C130872
- Issued
- 03 Dec 2025
- Valid until
- 02 Dec 2030
Certificate scope is limited to the product names and models listed in each original document. Ask our team to confirm which document applies to your selected configuration.
Configured Around Your Product
Machine selection begins with the real coil: core geometry, material, wire or tape size, finished dimensions and production target. The final configuration is confirmed with our technical team.
Dual winding-station design
Automatic cycle-count check and alarm
Up to 100 stored program positions
Digital production-data upload
GRJGRXJ · FOSHAN
A machine-building team since 1993
GRJGRXJ supports application review, configuration confirmation and export communication from its Foshan manufacturing team.
Built for Your Success
From initial selection to export delivery, our team helps turn your winding requirement into a practical machine configuration.
Catalog-based specifications
Application discussion
Configuration support
Export-ready communication
AJGC-0630SLD-GW
Get a model-specific recommendation
Send the coil basics here without leaving the product page. The selected model is included automatically in your inquiry.
Core geometry
Wire or tape
Finished coil
Production target
Compare Related Models
Review nearby models in the same machine family before confirming the final configuration.
Fully Automatic Winding Machine
AJGC-0630-GW
Fully Automatic Edge Sliding Magnetic Core Winding Machine
View Product
Fully Automatic Winding Machine
AJGJ-0630-GW
Fully Automatic Edge Sliding Racetrack Type Winding Machine
View Product
Motor Winding Machine
Automatic Stator Inner Winding Machine
Automatic Stator Inner Winding Machine
View ProductTell us your application
Request a Quote
Share your coil details and production needs. Our team will review the requirement and recommend a suitable configuration.
Frequently Asked Questions
What information should I provide?
Please send core dimensions, wire or tape size, finished coil dimensions, drawings or samples, and your target output.
Can the machine configuration be customized?
Where the catalog marks a parameter as customizable, our technical team will confirm the workable range for your product.
Are the product image and specifications accurate?
The main machine image and technical table on this page come from the current GRJGRXJ English catalog.
What wire diameter does AJGC-0630SLD-GW support?
AJGC-0630SLD-GW is listed in the current catalog with wire diameter of 0.06–0.30 mm. Confirm material and finished-coil details with our technical team before ordering.
What is the maximum working speed of AJGC-0630SLD-GW?
AJGC-0630SLD-GW is listed with Max. 1500 rpm. Actual production speed depends on the coil, material, winding program and required finish.